ST450 Convective Preheater, 230V

ST450 Convective Preheater, 230V



For stock availability and more information on this product please contact us on :- Email: or Tel: 01698 74505. Alternatively use the CONTACT US form from the menu tab above

Part Number:  8007-0434
Brand:  PACE

The ST 450 is an analog, closed loop, temperature controlled convective 1500 W preheater. The heating area is 140mm (5.5") x 140mm (5.5"). This preheater is ideal for applications where focused hot air is desirable or where cooling air is required after the application of heat such as area array applications. Additionally, the nature of hot air allows heat to get into those hard to reach places all too common on today's electronics.

The ST 450 can be used as is, or one of 3"air wash" nozzles can be attached to focus the heat where it is needed (4.5" Air Wash Nozzle 4058-0003-P1 is supplied with the system). The ST 450 can be used as a stand-alone unit with either the ST 525/ST 550 PCB holder or can be used with the ST 300, ST 325, or ST 350. When used with the ST 325/ST 350 (with the optional software package) the heater activity of the ST 450 can be controlled through the ST 325 or ST 350. The ST 450 is completely self-contained and when in cooling mode, the airflow is increased to 50 cfm.


Power Requirements
197-253 VAC, 50/60 Hz 1500Watts max.
Temperature stability
3°C (5 °F) at idle tip temp.
Temperature Stability
Meets or exceeds ANSI-J-STD
Temperature range
37-205°C (100-400°F)
Heating Airflow
35 cfm
Cooling Airflow
50 cfm
Focus Nozzle Part Numbers
4058-0001-P1 1.5° Square Nozzle || 4058-0002-P1 3° Square Nozzle || 4058-0003-P1 4.5° Square Nozzle


Be the first to Write a Review for this item!